Vehicular Compressor:
The natural gas compressors produced by our company mainly provide users with high-pressure natural gas sources. This product is mainly composed of vehicle bottom skid, compressor host, motor, safety valve, etc. The overall design is compact, the volume is small, the weight is light, the installation and transportation are convenient, the symmetrical balance design is adopted, and the stability is high. The benefit is that after the compressor is installed on the flatbed truck, it can adapt to various complex working conditions and carry out operations anywhere in a timely and convenient manner.
Features:
This type of equipment has high reliability, small size, light weight, high degree of automation, convenient operation, Stable air supply,Symmetrical balanced design, high stability,low mechanical vibration and low noise.
Technical Parameters:
Technical Parameters
|
Type
|
reciprocating piston compressor
|
Nominal volume flow
|
0.3-50Nm3/min
|
Suction pressure
|
0-30MPa
|
Exhaust pressure
|
0.1-50MPa
|
Suction temperature
|
5~45℃
|
Exhaust gas temperature
|
≤45℃
|
Oil content (ppm)
|
≤3
|
Exhaust particle size (μm)
|
≤3
|
Cooling method
|
Water cooling/Air cooling
|
Noise sound pressure level
|
≤85dB(A)
|
Power
|
30-400kw
|
Vibration intensity
|
≤18.0mm/s
|
Compressor service life
|
More than 25 years
|
Lubrication method
|
Cylinder: splash lubrication (if the exhaust pressure is lower than 10MPa, oil-free lubrication can be realized)
Crankshaft, connecting rod: pressure lubrication.
|
Process flow:
After being separated and filtered from the outside, the gas enters the first-stage air inlet of the compressor. After being compressed, it enters the first-stage cooler. After cooling, it enters the second-stage intake air. After being compressed, it enters the second-stage cooler. The gas pressure determines the number of compression stages. The gas needs to be cooled after each compression. After reaching the customer's required pressure, the gas is discharged from the end cooler.
Applications:
This type of equipment is widely used in food, medicine, oil field, chemical and other industries.